This examination work aims to describe how a supply chain around the biggest Pellets factory in Sweden will be configured in a logistic perspective. The plant and associated infrastructure are in the building phase and will have production start on the 2 November 2009. The key question that is set in this examination work is to recognize the logistic processes which are essential for an effective flow of materials and information that link the source of supply with the ultimate customer. In order to get the answer, a flowcharting of these supply chain processes is required for understanding the pipeline activities such as input and storage of raw material, the production system and the output of pellets to the customers. The basis for this supply chain map is a model-based representation of these logistic processes and activities that are involved around the Pellets factory.

At SIA TallOil's Pellets factory in Latvia wood shavings and saw dust are dried with flue gases from a gas burner. TallOil wants to replace the gas with a biofuel that is available at the pellet plant. The reason for this is the unstable gas market in Europe in combination with the fact that TallOil wants to improve its profile as supplier of renewable bio fuels. In this project the technical and economical possibilities for a fuel conversion to ether bark powder, wood shavings or wood powder have been investigated. These fuels should be burned in one of the following applications: TPS BioSwirl, VTS Multifuel burner or Saxlunds bio fuel combustion plant Due to the fact that the fuel alternatives available are relatively common except for bark powder, the work has mainly been focused on bark powder.

This thesis discusses various approaches that venture capitalists have when evaluating investment prospects. The thesis is a case study of the business angel network Firm Factory Network. The empirical material is based on an extensive interview with Firm Factory CEO Daniel Kaplan. Our conclusion is that Firm Factory Network uses both informal and formal methods when they evaluate interesting prospects..

Fuel pellets are in Sweden mainly produced from sawdust and cutter shavings. Before the pelletising process the raw material is dried to attain consistent moisture content and ground up in a hammer mill. In the densification process (pelletising) the ground material is forced through holes in a rotating die. This heats up the wood particles which cause them to soften and self bond. After the process the pellets are cooled, sieved and bagged. The milling process creates a wide range of particle sizes.

This is an investigation of a mobile prefabrication factory´s competitiveness and profitability which also will result in a suggestion for a design of the factory. The mobile prefabrication factory is an idea of a new concept for production which is meant to be used in the manufacture of slab. The main intention with this concept is that by using a fast established prefabrication factory to produce elements near the construction site, thus avoiding transport from the factory to the building site. This means not only an environmental and economic gain, but also that you can avoid risking damage the elements which often occur during transportation. The contractor is owner of the mobile prefabrication factory and can thus avoid long waiting times and cyclicality.

With the help of large amount of archive material I have examined how Gustavsberg in Värmdö were affected by the great labor migration in Gustavsberg porcelain factory during the period 1869-1924. I have chosen to investigate how the municipality dealt with the poverty relief issue out of the labour immigration perspective. To my surprise I found out that Värmdö was not responsible for Gustavsberg in the poverty issue. The workers belonged to the factory, which had a relatively well-developed system of poverty relief in place. This is not to say that the workers received any support from the factory to any great extent.

Wood pellets are an upgraded product of residuals from several wood processing industries, for example saw mills and pulp industries. The pellets are produced by pressing the milled and dried sawdust to cylindrical units with a higher density than the initial raw material. Pellets have great benefits compared to the raw material: high energy per volume, good transport and storage properties and homogeneity. Several parameters collaborate in the whole process, which makes it complex. Wood is a heterogeneous material, chemically and structurally dependent on wood parts, habitat and storage procedures.

In the last decades the continuous work for more sustainable manufacturing has become a large part of the manufacturing companies? operations. It is also well known that the factory planning shapes the manufacturing process to a great extent. Consequently it is logical to assume that the manufacturing companies? factory planning process plays a major role in the work for increased sustainability.

This paper is a study with two different aspects, with a main focus of the match factory in Jönköping. The first aspect is about how the work situation for children looked like in the match factory during the 1900 - century. The children´s work history over time, the children?s workday and life situation on the factory and outside is described in this paper. The second aspect in this paper is about how the pupils learn about their local history in the 3 and 4 grade.

With higher prices for oil and increased focus on fossil fuels impact on the environment the heating sector are searching for alternative fuels. Pellets are a quite new product whose production has risen exponential in recent years. Today there are small-, medium-and large-scale users, where the large-scale consumers are the heating sector. The heating sector is mainly using oil to cover the increased demand during cold periods. The purpose of this study is to analyze the potential of pellets if it would replace thermal power plants oil and coal. The study will also analyze the economic impact a conversion would mean for a heating plant and if the pellet is a reasonable substitute. 2008 statistics from the Swedish district heating association were analyzed and a calculation was performed to determine how many tons of pellets is needed to replace coal and oil.

Detta examensarbete har utförts vid LKAB:s FoU-avdelning i Luleå och vid LKAB:s metallurgiska laboratorium i Malmberget. LKAB har en världsledande position som producent av järnmalmsprodukter till stålindustrin. Huvudprodukten är magnetitbaserade pellets för råjärnsframställning i masugnar och direktreduktionsugnar. En förutsättning för en jämn och hög masugnsdrift är en god gasgenomströmning med ett lågt tryckfall. Abnorm svällning av pellets medför minskad porositet i pellets och minskade hålrum i beskickningen, vilket har en negativ inverkan på gasgenomströmningen.

This examination work brings up opportunities to invest in a construction for heating with grain or pellets on farm level. As example we have chosen Fröberga Gård which is a farm located in Östergötland outside of Söderköping. The farm`s residential buildings is to day heated with oil and electricity. The result of our investigation shows that heating with grain is the best alternative, partly because of economical issues but also because you can grow the grain on your own farm and by that you can get better economy in your seed cultivation. To grow 16 tonne of grain as is needed demand gives a insignificant increase of work. Further an advantage is that no investment in machines is needed because all the machines witch is needed already is in use on the farm. In a situation where a new investment is needed as in the case we studied, is it often profitable to invest in a integrated furnace. Because all the components are well adapted to each other, and because that gives a high efficiency. If you already own a well working furnace is it often most profitable to connect a burner to it. It is important to know that heating with grain need more work than heating with pellets, because the high contents of ash in grain. Even if you choose pellets instead of grain the calculation shows good results. Because peat is an excellent but fairly untested raw material for pelletsproduction we have chosen to watch little more on its quality and conductions. We discovered that peat has a high heating value which makes it possible to raise the heat value in pellets through mix up peat and wood. Or you can make pellets with only peat and get a pellet with high heating value. Even the calculation with peatheating shows good results..

This paper illustrates the working conditions at the copper factory in Åtvidaberg during 1800-1890 from different views. The highest salary was given to the building contractor. Thereafter came in order the rust turners, the garmaker, the melter, the ore booker, the factory supervisor and the garmaker hand. Also the rest of the working conditions for different employees might differ from each other in this order. The mine workers generally earned a little less than the other workers at the factory, and especially the workers in the Bersbo mine.

Idag a?r fossila bra?nslen fortfarande de fra?msta energika?llorna runt om i va?rlden. Enligt ma?nga experter kommer snart inte produktionen kunna tillfredssta?lla efterfra?gan av olja. Da?rfo?r bo?r o?verga?ngen till alternativa bra?nslen ske sa? fort som mo?jligt.

Volvo Trucks is the second largest manufacturer of heavy trucks, with factories in several countries and with around 21 000 employees. At the plant in Tuve, trucks have been built since 1982 and the activity mainly consists of producing side members and to assemble and packing kits of trucks. In 2005, the factory in Tuve launched the ambition to be the first carbon dioxide neutral vehicle factory in the world. This will be implemented by streamlining and investing in renewable energy. The aim of this degree thesis is to map the usage of energy within production, and also to prepare a method to measure key figures (use of energy per produced unit).